weblate/docs/admin/auth.rst

Authentication
==============

User registration
-----------------

The default setup for Weblate is to use python-social-auth, a form on the website
to handle registration of new users. After confirming their e-mail a new user can
contribute or authenticate by using one of the third party services.

You can also turn off registration of new users using
:setting:`REGISTRATION_OPEN`.

The authentication attempts are subject to :ref:`rate-limit`.


Authentication backends
-----------------------

Weblate relies on Django for the authentication. This includes built-in
password-based authentication, social authentication, and third-party
authentication backends for Django.

Using Django's built-in authentication means you can import the user database
of other Django-based projects (see :ref:`pootle-migration`).

.. seealso::

   :ref:`docker-auth` describes how to configure authentication in the official
   Docker image.

Social authentication
---------------------

Thanks to :doc:`psa:index`, Weblate support authentication using many third
party services such as GitLab, Ubuntu, Fedora, etc.

Please check their documentation for generic configuration instructions
in :doc:`psa:configuration/django`.

.. note::

    By default, Weblate relies on third-party authentication services to
    provide a validated e-mail address. If some of the services you want to use
    don't support this, please enforce e-mail validation on the Weblate side
    by configuring FORCE_EMAIL_VALIDATION for them. For example:

    .. code-block:: python

        SOCIAL_AUTH_OPENSUSE_FORCE_EMAIL_VALIDATION = True

    .. seealso::

       :doc:`psa:pipeline`

Enabling individual backends is quite easy, it's just a matter of adding an entry to
the :setting:`django:AUTHENTICATION_BACKENDS` setting and possibly adding keys needed for a given
authentication method. Please note that some backends do not provide user e-mail by
default, you have to request it explicitly, otherwise Weblate will not be able
to properly credit contributions users make.

.. hint::

   Most of the authentication backends require HTTPS. Once HTTPS is enabled in your web server
   please configure Weblate to report it properly using :setting:`ENABLE_HTTPS`, or by
   :envvar:`WEBLATE_ENABLE_HTTPS` in the Docker container.

.. seealso::

    :doc:`Python Social Auth backend <psa:backends/index>`

OpenID authentication
~~~~~~~~~~~~~~~~~~~~~

For OpenID-based services it's usually just a matter of enabling them. The following
section enables OpenID authentication for OpenSUSE, Fedora and Ubuntu:

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.email.EmailAuth",
        "social_core.backends.suse.OpenSUSEOpenId",
        "social_core.backends.ubuntu.UbuntuOpenId",
        "social_core.backends.fedora.FedoraOpenId",
        "weblate.accounts.auth.WeblateUserBackend",
    )

.. seealso::

   :doc:`psa:backends/openid`

.. _github_auth:

GitHub authentication
~~~~~~~~~~~~~~~~~~~~~

You need to register an OAuth application on GitHub and then tell Weblate all its secrets:

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.github.GithubOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_GITHUB_KEY = "GitHub Client ID"
    SOCIAL_AUTH_GITHUB_SECRET = "GitHub Client Secret"
    SOCIAL_AUTH_GITHUB_SCOPE = ["user:email"]

The GitHub should be configured to have callback URL as
``https://WEBLATE SERVER/accounts/complete/github/``.

There are similar authentication backends for GitHub for Organizations and
GitHub for Teams. Their settings are named ``SOCIAL_AUTH_GITHUB_ORG_*`` and
``SOCIAL_AUTH_GITHUB_TEAM_*``, and they require additional setting of the scope
- ``SOCIAL_AUTH_GITHUB_ORG_NAME`` or ``SOCIAL_AUTH_GITHUB_TEAM_ID``. Their
callback URLs are ``https://WEBLATE SERVER/accounts/complete/github-org/`` and
``https://WEBLATE SERVER/accounts/complete/github-teams/``.

.. include:: /snippets/oauth-site.rst

.. seealso::

    :doc:`psa:backends/github`

.. _github_ee_auth:

GitHub EE authentication
~~~~~~~~~~~~~~~~~~~~~~~~

You need to register an OAuth App on GitHub EE and then tell Weblate all its secrets:

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.github_enterprise.GithubEnterpriseOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_GITHUB_ENTERPRISE_KEY = "GitHub OAuth App Client ID"
    SOCIAL_AUTH_GITHUB_ENTERPRISE_SECRET = "GitHub OAuth App Client Secret"
    SOCIAL_AUTH_GITHUB_ENTERPRISE_URL = "https://git.example.com/"
    SOCIAL_AUTH_GITHUB_ENTERPRISE_API_URL = "https://git.example.com/api/v3/"
    SOCIAL_AUTH_GITHUB_ENTERPRISE_SCOPE = ["user:email"]

The GitHub OAuth App should be configured to have callback URL as
``https://WEBLATE SERVER/accounts/complete/github-enterprise/``.

Instead GitHub OAuth App, GitHub App can also be used. With GitHub App
permissions can be granted on repositories, organisation and/or user level. If
you decide to use GitHub App, you need to enable `Access: Read-only` permission
for Users - <Email addresses> and Organisation - <Members>.

.. include:: /snippets/oauth-site.rst

.. seealso::

    :doc:`psa:backends/github_enterprise`

.. _bitbucket_auth:

Bitbucket authentication
~~~~~~~~~~~~~~~~~~~~~~~~

You need to register an application on Bitbucket and then tell Weblate all its secrets:

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.bitbucket.BitbucketOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_BITBUCKET_OAUTH2_KEY = "Bitbucket Client ID"
    SOCIAL_AUTH_BITBUCKET_OAUTH2_SECRET = "Bitbucket Client Secret"
    SOCIAL_AUTH_BITBUCKET_OAUTH2_VERIFIED_EMAILS_ONLY = True

.. include:: /snippets/oauth-site.rst

.. seealso::

   :doc:`psa:backends/bitbucket`

.. _google_auth:

Google OAuth 2
~~~~~~~~~~~~~~

To use Google OAuth 2, you need to register an OAuth application at
<https://console.developers.google.com/>.

The redirect URL is ``https://WEBLATE SERVER/accounts/complete/google-oauth2/``.

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.google.GoogleOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_GOOGLE_OAUTH2_KEY = "Client ID"
    SOCIAL_AUTH_GOOGLE_OAUTH2_SECRET = "Client secret"

.. include:: /snippets/oauth-site.rst

.. seealso::

   :doc:`psa:backends/google`

.. _facebook_auth:

Facebook OAuth 2
~~~~~~~~~~~~~~~~

As per usual with OAuth 2 services, you need to register your application with
Facebook. Once this is done, you can set up Weblate to use it:

The redirect URL is ``https://WEBLATE SERVER/accounts/complete/facebook/``.

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.facebook.FacebookOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_FACEBOOK_KEY = "key"
    SOCIAL_AUTH_FACEBOOK_SECRET = "secret"
    SOCIAL_AUTH_FACEBOOK_SCOPE = ["email", "public_profile"]

.. include:: /snippets/oauth-site.rst

.. seealso::

   :doc:`psa:backends/facebook`


.. _gitlab_auth:

GitLab OAuth 2
~~~~~~~~~~~~~~

For using GitLab OAuth 2, you need to register an application at
<https://gitlab.com/profile/applications>.

The redirect URL is ``https://WEBLATE SERVER/accounts/complete/gitlab/`` and
ensure you mark the `read_user` scope.

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.gitlab.GitLabOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_GITLAB_KEY = "Application ID"
    SOCIAL_AUTH_GITLAB_SECRET = "Secret"
    SOCIAL_AUTH_GITLAB_SCOPE = ["read_user"]

    # If you are using your own GitLab
    # SOCIAL_AUTH_GITLAB_API_URL = 'https://gitlab.example.com/'

.. include:: /snippets/oauth-site.rst

.. seealso::

   :doc:`psa:backends/gitlab`

.. _gitea_auth:

Gitea OAuth 2
~~~~~~~~~~~~~~

For using Gitea OAuth 2, you need to register an application at
``https://GITEA SERVER/user/settings/applications``.

The redirect URL is ``https://WEBLATE SERVER/accounts/complete/gitea/``.

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.gitea.GiteaOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_GITEA_KEY = ""
    SOCIAL_AUTH_GITEA_SECRET = ""

    # If you are using your own Gitea
    SOCIAL_AUTH_GITEA_API_URL = "https://gitea.example.com/"

.. include:: /snippets/oauth-site.rst

.. note::

   The configuration above also works with Forgejo;
   for an example of production deployment with Forgejo,
   see `Codeberg Translate <https://translate.codeberg.org>`_.

.. seealso::

   :doc:`psa:backends/gitea`

.. _azure-auth:

Microsoft Azure Active Directory
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

Weblate can be configured to use common or specific tenants for authentication.

The redirect URL is ``https://WEBLATE SERVER/accounts/complete/azuread-oauth2/``
for common and ``https://WEBLATE SERVER/accounts/complete/azuread-tenant-oauth2/``
for tenant-specific authentication.

You will need following:

* *Application (client) ID* can be obtained from application page. *Object ID* is not used in Weblate.
* *Directory (tenant) ID* is needed for tenant scoped authentication, what is usually desired.
* *Secret value* is displayed once you generate a secret for an application. *Secret ID* is not used in Weblate.

.. code-block:: python

    # Azure AD common

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.azuread.AzureADOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # OAuth2 keys
    SOCIAL_AUTH_AZUREAD_OAUTH2_KEY = ""
    SOCIAL_AUTH_AZUREAD_OAUTH2_SECRET = ""

.. code-block:: python

    # Azure AD Tenant

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.azuread_tenant.AzureADTenantOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Application (client) ID
    SOCIAL_AUTH_AZUREAD_TENANT_OAUTH2_KEY = ""
    # Secret value
    SOCIAL_AUTH_AZUREAD_TENANT_OAUTH2_SECRET = ""
    # Directory (tenant) ID
    SOCIAL_AUTH_AZUREAD_TENANT_OAUTH2_TENANT_ID = ""

.. include:: /snippets/oauth-site.rst

.. seealso::

   :doc:`psa:backends/azuread`

.. _slack-auth:

Slack
~~~~~

For using Slack OAuth 2, you need to register an application at
<https://api.slack.com/apps>.

The redirect URL is ``https://WEBLATE SERVER/accounts/complete/slack/``.

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.slack.SlackOAuth2",
        "social_core.backends.email.EmailAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_SLACK_KEY = ""
    SOCIAL_AUTH_SLACK_SECRET = ""

.. include:: /snippets/oauth-site.rst

.. seealso::

   :doc:`psa:backends/slack`


Overriding authentication method names and icons
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

You can override the authentication method display name and icon using using settings as
``SOCIAL_AUTH_<NAME>_IMAGE`` and ``SOCIAL_AUTH_<NAME>_TITLE``. For example
overriding naming for Auth0 would look like:

.. code-block:: python

   SOCIAL_AUTH_AUTH0_IMAGE = "custom.svg"
   SOCIAL_AUTH_AUTH0_TITLE = "Custom auth"

.. _disable-email-auth:

Turning off password authentication
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

E-mail and password authentication can be turned off by removing
``social_core.backends.email.EmailAuth`` from
:setting:`django:AUTHENTICATION_BACKENDS`. Always keep
``weblate.accounts.auth.WeblateUserBackend`` there, it is needed for core
Weblate functionality.

Disabling e-mail authentication will disable all e-mail related functionality –
user invitation or password reset feature.

.. tip::

   You can still use password authentication for the admin interface, for users you
   manually create there. Just navigate to ``/admin/login/``.

For example authentication using only the openSUSE Open ID provider can be achieved
using the following:

.. code-block:: python

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.suse.OpenSUSEOpenId",
        "weblate.accounts.auth.WeblateUserBackend",
    )

.. _password-authentication:

Password authentication
-----------------------

The default :file:`settings.py` comes with a reasonable set of
:setting:`django:AUTH_PASSWORD_VALIDATORS` that ensures that weak passwords are
not allowed. You can customize this setting to match your password policy.

Additionally you can also install
`django-zxcvbn-password-validator <https://github.com/Pierre-Sassoulas/django-zxcvbn-password-validator>`_
which gives quite realistic estimates of password difficulty and allows rejecting
passwords below a certain threshold.

.. seealso::

   * :setting:`PASSWORD_MINIMAL_STRENGTH`
   * :envvar:`WEBLATE_MIN_PASSWORD_SCORE`
   * :doc:`/security/passwords`


.. _saml-auth:

SAML authentication
-------------------

.. versionadded:: 4.1.1

.. versionchanged:: 5.12

   The dependencies for SAML authentication are no longer included in the
   default ``all`` extras. You need to include ``saml`` while installing the
   Weblate package using pip (``uv pip install Weblate[all,saml]``).

Please follow the Python Social Auth instructions for configuration. Notable differences:

* Weblate supports single IDP which has to be called ``weblate`` in
  ``SOCIAL_AUTH_SAML_ENABLED_IDPS``.
* The SAML XML metadata URL is ``/accounts/metadata/saml/``.
* Following settings are automatically filled in:
  ``SOCIAL_AUTH_SAML_SP_ENTITY_ID``, ``SOCIAL_AUTH_SAML_TECHNICAL_CONTACT``,
  ``SOCIAL_AUTH_SAML_SUPPORT_CONTACT``

Example configuration:

.. code-block::

    # Authentication configuration
    AUTHENTICATION_BACKENDS = (
        "social_core.backends.email.EmailAuth",
        "social_core.backends.saml.SAMLAuth",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # Social auth backends setup
    SOCIAL_AUTH_SAML_SP_ENTITY_ID = f"https://{SITE_DOMAIN}/accounts/metadata/saml/"
    SOCIAL_AUTH_SAML_SP_PUBLIC_CERT = "-----BEGIN CERTIFICATE-----"
    SOCIAL_AUTH_SAML_SP_PRIVATE_KEY = "-----BEGIN PRIVATE KEY-----"
    SOCIAL_AUTH_SAML_ENABLED_IDPS = {
        "weblate": {
            "entity_id": "https://idp.testshib.org/idp/shibboleth",
            "url": "https://idp.testshib.org/idp/profile/SAML2/Redirect/SSO",
            "x509cert": "MIIEDjCCAvagAwIBAgIBADA ... 8Bbnl+ev0peYzxFyF5sQA==",
        }
    }
    SOCIAL_AUTH_SAML_ORG_INFO = {
        "en-US": {
            "name": "example",
            "displayname": "Example Inc.",
            "url": "http://example.com"
        }
    }
    SOCIAL_AUTH_SAML_TECHNICAL_CONTACT = {
        "givenName": "Tech Gal",
        "emailAddress": "technical@example.com"
    }
    SOCIAL_AUTH_SAML_SUPPORT_CONTACT = {
        "givenName": "Support Guy",
        "emailAddress": "support@example.com"
    }

The default configuration extracts user details from following attributes,
configure your IdP to provide them:

+--------------+-----------------------------------------+
| Attribute    | SAML URI reference                      |
+==============+=========================================+
| Full name    | ``urn:oid:2.5.4.3``                     |
+--------------+-----------------------------------------+
| First name   | ``urn:oid:2.5.4.42``                    |
+--------------+-----------------------------------------+
| Last name    | ``urn:oid:2.5.4.4``                     |
+--------------+-----------------------------------------+
| E-mail       | ``urn:oid:0.9.2342.19200300.100.1.3``   |
+--------------+-----------------------------------------+
| Username     | ``urn:oid:0.9.2342.19200300.100.1.1``   |
+--------------+-----------------------------------------+

When configuring Weblate SP in your IdP, it is recommended to choose persistent
:guilabel:`Name ID format`.

.. hint::

   The example above and the Docker image define an IdP called ``weblate``.
   You might need to configure this string as :guilabel:`Relay` in your IdP.

.. note::

   Weblate authentication relies on the ``RelayState`` parameter to be passed
   through the authentication process. This needs to be configured with some
   identity providers:

   * `How to Send a Custom RelayState with Okta`_

.. _How to Send a Custom RelayState with Okta: https://support.okta.com/help/s/article/How-to-send-a-custom-relaystate-to-application-through-idp-initiated-authentication-urls

.. seealso::

   * :ref:`Configuring SAML in Docker <docker-saml>`
   * :doc:`psa:backends/saml`

.. _ldap-auth:

LDAP authentication
-------------------

LDAP authentication can be best achieved using the `django-auth-ldap` package. You
can install it via usual means:

.. code-block:: sh

    # Using PyPI
    uv pip install 'django-auth-ldap>=1.3.0'

    # Using apt-get
    apt-get install python-django-auth-ldap

.. hint::

   This package is included in the Docker container, see :doc:`/admin/install/docker`.

.. note::

   There are some incompatibilities in the Python LDAP 3.1.0 module, which might
   prevent you from using that version. If you get error `AttributeError:
   'module' object has no attribute '_trace_level'
   <https://github.com/python-ldap/python-ldap/issues/226>`_, downgrading
   python-ldap to 3.0.0 might help.

Once you have the package installed, you can hook it into the Django authentication:

.. code-block:: python

    # Add LDAP backed, keep Django one if you want to be able to sign in
    # even without LDAP for admin account
    AUTHENTICATION_BACKENDS = (
        "django_auth_ldap.backend.LDAPBackend",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # LDAP server address
    AUTH_LDAP_SERVER_URI = "ldaps://ldap.example.net"

    # DN to use for authentication
    AUTH_LDAP_USER_DN_TEMPLATE = "cn=%(user)s,o=Example"
    # Depending on your LDAP server, you might use a different DN
    # like:
    # AUTH_LDAP_USER_DN_TEMPLATE = 'ou=users,dc=example,dc=com'

    # List of attributes to import from LDAP upon sign in
    # Weblate stores full name of the user in the full_name attribute
    AUTH_LDAP_USER_ATTR_MAP = {
        "full_name": "name",
        # Use the following if your LDAP server does not have full name
        # Weblate will merge them later
        # 'first_name': 'givenName',
        # 'last_name': 'sn',
        # Email is required for Weblate (used in VCS commits)
        "email": "mail",
    }

    # Hide the registration form
    REGISTRATION_OPEN = False

.. note::

    You should remove ``'social_core.backends.email.EmailAuth'`` from the
    :setting:`django:AUTHENTICATION_BACKENDS` setting, otherwise users will be able to set
    their password in Weblate, and authenticate using that. Keeping
    ``'weblate.accounts.auth.WeblateUserBackend'`` is still needed in order to
    make permissions and facilitate anonymous users. It will also allow you
    to sign in using a local admin account, if you have created it (e.g. by using
    :wladmin:`createadmin`).

Using bind password
~~~~~~~~~~~~~~~~~~~

If you can not use direct bind for authentication, you will need to use search,
and provide a user to bind for the search. For example:

.. code-block:: python

   import ldap
   from django_auth_ldap.config import LDAPSearch

   AUTH_LDAP_BIND_DN = ""
   AUTH_LDAP_BIND_PASSWORD = ""
   AUTH_LDAP_USER_SEARCH = LDAPSearch(
       "ou=users,dc=example,dc=com", ldap.SCOPE_SUBTREE, "(uid=%(user)s)"
   )

Active Directory integration
~~~~~~~~~~~~~~~~~~~~~~~~~~~~

.. code-block:: python

    import ldap
    from django_auth_ldap.config import LDAPSearch, NestedActiveDirectoryGroupType

    AUTH_LDAP_BIND_DN = "CN=ldap,CN=Users,DC=example,DC=com"
    AUTH_LDAP_BIND_PASSWORD = "password"

    # User and group search objects and types
    AUTH_LDAP_USER_SEARCH = LDAPSearch(
        "CN=Users,DC=example,DC=com", ldap.SCOPE_SUBTREE, "(sAMAccountName=%(user)s)"
    )

    # Make selected group a superuser in Weblate
    AUTH_LDAP_USER_FLAGS_BY_GROUP = {
        # is_superuser means user has all permissions
        "is_superuser": "CN=weblate_AdminUsers,OU=Groups,DC=example,DC=com",
    }

    # Map groups from AD to Weblate
    AUTH_LDAP_GROUP_SEARCH = LDAPSearch(
        "OU=Groups,DC=example,DC=com", ldap.SCOPE_SUBTREE, "(objectClass=group)"
    )
    AUTH_LDAP_GROUP_TYPE = NestedActiveDirectoryGroupType()
    AUTH_LDAP_FIND_GROUP_PERMS = True

    # Optionally enable group mirroring from LDAP to Weblate
    # AUTH_LDAP_MIRROR_GROUPS = True

.. seealso::

   * :doc:`ldap:index`
   * :doc:`ldap:authentication`


.. _cas-auth:


CAS authentication
------------------

CAS authentication can be achieved using a package such as `Django CAS NG`_.

Step one is disclosing the e-mail field of the user via CAS. This has to be
configured on the CAS server itself, and requires you run at least CAS v2 since
CAS v1 doesn't support attributes at all.

Step two is updating Weblate to use your CAS server and attributes.

To install `Django CAS NG`_:

.. code-block:: sh

    uv pip install django-cas-ng

Once you have the package installed you can hook it up to the Django
authentication system by modifying the :file:`settings.py` file:

.. code-block:: python

    # Add CAS backed, keep the Django one if you want to be able to sign in
    # even without LDAP for the admin account
    AUTHENTICATION_BACKENDS = (
        "django_cas_ng.backends.CASBackend",
        "weblate.accounts.auth.WeblateUserBackend",
    )

    # CAS server address
    CAS_SERVER_URL = "https://cas.example.net/cas/"

    # Add django_cas_ng somewhere in the list of INSTALLED_APPS
    INSTALLED_APPS = (..., "django_cas_ng")

Finally, a signal can be used to map the e-mail field to the user object. For
this to work you have to import the signal from the `django-cas-ng` package and
connect your code with this signal. Doing this in settings file can
cause problems, therefore it's suggested to put it:

- In your app config's :py:meth:`django:django.apps.AppConfig.ready` method
- In the project's :file:`urls.py` file (when no models exist)

.. code-block:: python

    from django_cas_ng.signals import cas_user_authenticated
    from django.dispatch import receiver


    @receiver(cas_user_authenticated)
    def update_user_email_address(sender, user=None, attributes=None, **kwargs):
        # If your CAS server does not always include the email attribute
        # you can wrap the next two lines of code in a try/catch block.
        user.email = attributes["email"]
        user.save()

.. _Django CAS NG: https://github.com/django-cas-ng/django-cas-ng

Configuring third party Django authentication
---------------------------------------------

Generally any Django authentication plugin should work with Weblate. Just
follow the instructions for the plugin, just remember to keep the Weblate user backend
installed.

.. seealso::

   * :ref:`ldap-auth`
   * :ref:`cas-auth`

Typically the installation will consist of adding an authentication backend to
:setting:`django:AUTHENTICATION_BACKENDS` and installing an authentication app (if
there is any) into :setting:`django:INSTALLED_APPS`:

.. code-block:: python

    AUTHENTICATION_BACKENDS = (
        # Add authentication backend here
        "weblate.accounts.auth.WeblateUserBackend",
    )

    INSTALLED_APPS += (
        # Install authentication app here
    )


.. _2fa:

Two-factor authentication
=========================

.. versionadded:: 5.7

.. hint::

   Two-factor authentication adds another layer of security to your account by requiring more than just a password to sign in.

Weblate supports the following second factors:

Security keys (WebAuthn)
   Both, Passkeys and security keys are supported.

   Passkeys validate your identity using touch, facial recognition, a device password, or a PIN as they include user verification.

   Security keys are WebAuthn credentials that can only be used as a second factor of authentication, and these only validate user presence.

Authenticator apps (TOTP)
   Authenticator apps and browser extensions like Aegis, Bitwarden, Google Authenticator,
   1Password, Authy, Microsoft Authenticator, etc. generate time-based one-time passwords
   that are used as a second factor to verify your identity when prompted
   during sign-in.

Recovery codes
   Recovery codes can be used to access your account if you lose access to your device and cannot receive two-factor authentication codes.

   Keep your recovery codes as safe as your password. We recommend saving them with a password manager such as Bitwarden, 1Password, Authy, or Keeper.

Each user can configure this in :ref:`profile-account` and second factor will
be required to sign in addition to the existing authentication method.

This can be enforced for users at the project (see :ref:`project-enforced_2fa`) or team level.

The permissions of a team with enforced two-factor authentication won't be applied to users who do not have it configured.